Posted By admin Posted On

Correct Care and Cleansing of Datamax Label Printers

The road of Datamax-O’Neil label printers embody stationary printers comparable to ticket printers, RFID printers/encoders, compact desktop printers, and industrial bar code printers. Portable label printers are additionally accessible which embody forklift printers, thermal receipt printers, ultra-rugged receipt printers, and multi-part dot matrix printers. Whereas every of the Datamax-O’Neil printers has a particular operate, with out correct care and upkeep these printers will fail to do their job efficiently leading to frustration, poorly printed labels and better upkeep prices.

This text will consider the cleansing of desktop printers though most of the methods described beneath can be utilized on the portable thermal label printers as properly. Cleansing any customary Datamax desktop printer would require a set of cleansing provides. Hold a equipment stuffed with isopropyl alcohol, cotton swabs, lint-free cloths, and compressed air. These are the one provides that must be wanted to scrub any of the Datamax desktop label printers.

Earlier than you begin cleansing you will have to have the ability to establish the varied components of your printer. A very powerful components are the print-head, platen curler, and media sensor. The media sensor is the mechanisms that detects if the label and ribbon is in place as they roll concurrently by means of the printer. The print-head, by way of warmth alternate, prints the picture immediately on the media or ribbon which transfers ink to the media. The platen curler advances the media because it prints. Test your handbook to offer you a visible for every of those components. thermal Label printer B08QFQKPLC

Earlier than you clear something on a Datamax printer, flip the ability to ‘off’ and unplug the printer. By no means clear a printer that’s scorching to the contact to keep away from getting burned. Understand that alcohol is flammable, so by no means use it round open flame. Additionally by no means use a pointy object, comparable to a knife or toothpick, to scrub the print-head, media sensor, or platen curler.

Clear the print-head and platen curler after 3 rolls of labels or one roll of ribbon has run by means of the machine. As you open the printer to exchange both the labels or ribbon, reap the benefits of this by cleansing the print-head and platen curler earlier than including the brand new media to the printer. To wash the print-head, dip a cotton swab into alcohol. Shake away any extra liquid. Wipe the cotton swab throughout the print-head to take away any build-up from the ribbon. For cleansing the platen curler, moisten a lint-free material with alcohol. Swipe the material forwards and backwards throughout the size of the platen curler, rotating the curler as you wipe. Permit the print-head and platen curler to dry fully earlier than changing the media.

To be able to clear the media sensor, or the ‘eye’ of the print-head, use a cotton swab dipped in alcohol to wipe it clear. This must be executed at the very least as soon as a month, or when you see seen buildup of residue. Every time y